Switch from stowsh to dotbot

2 files changed, 0 insertions, 456 deletions

diff --git a/base/.vim/doc/matchit.txt b/base/.vim/doc/matchit.txt
deleted file mode 100644
index 8a3a96e..0000000
--- a/base/.vim/doc/matchit.txt
+++ /dev/null
@@ -1,406 +0,0 @@
-*matchit.txt*   Extended "%" matching
-
-For instructions on installing this file, type
-	:help matchit-install
-inside Vim.
-
-For Vim version 6.3.  Last change:  2007 Aug 29
-
-
-		  VIM REFERENCE MANUAL    by Benji Fisher
-
-*matchit* *matchit.vim*
-
-1. Extended matching with "%"				|matchit-intro|
-2. Activation						|matchit-activate|
-3. Configuration					|matchit-configure|
-4. Supporting a New Language				|matchit-newlang|
-5. Known Bugs and Limitations				|matchit-bugs|
-
-The functionality mentioned here is a plugin, see |add-plugin|.
-This plugin is only available if 'compatible' is not set.
-You can avoid loading this plugin by setting the "loaded_matchit" variable
-in your |vimrc| file: >
-	:let loaded_matchit = 1
-
-{Vi does not have any of this}
-
-==============================================================================
-1. Extended matching with "%"				*matchit-intro*
-
-							*matchit-%*
-%	Cycle forward through matching groups, such as "if", "else", "endif",
-	as specified by |b:match_words|.
-
-							*g%* *v_g%* *o_g%*
-g%	Cycle backwards through matching groups, as specified by
-	|b:match_words|.  For example, go from "if" to "endif" to "else".
-
-							*[%* *v_[%* *o_[%*
-[%	Go to [count] previous unmatched group, as specified by
-	|b:match_words|.  Similar to |[{|.
-
-							*]%* *v_]%* *o_]%*
-]%	Go to [count] next unmatched group, as specified by
-	|b:match_words|.  Similar to |]}|.
-
-							*v_a%*
-a%	In Visual mode, select the matching group, as specified by
-	|b:match_words|, containing the cursor.  Similar to |v_a[|.
-	A [count] is ignored, and only the first character of the closing
-	pattern is selected.
-
-In Vim, as in plain vi, the percent key, |%|, jumps the cursor from a brace,
-bracket, or paren to its match.  This can be configured with the 'matchpairs'
-option.  The matchit plugin extends this in several ways:
-
-	    You can match whole words, such as "if" and "endif", not just
-	single characters.  You can also specify a |regular-expression|.
-	    You can define groups with more than two words, such as "if",
-	"else", "endif".  Banging on the "%" key will cycle from the "if" to
-	the first "else", the next "else", ..., the closing "endif", and back
-	to the opening "if".  Nested structures are skipped.  Using |g%| goes
-	in the reverse direction.
-	    By default, words inside comments and strings are ignored, unless
-	the cursor is inside a comment or string when you type "%".  If the
-	only thing you want to do is modify the behavior of "%" so that it
-	behaves this way, you do not have to define |b:match_words|, since the
-	script uses the 'matchpairs' option as well as this variable.
-
-See |matchit-details| for details on what the script does, and |b:match_words|
-for how to specify matching patterns.
-
-MODES:			*matchit-modes* *matchit-v_%* *matchit-o_%*
-
-Mostly, % and related motions (|g%| and |[%| and |]%|) work just like built-in
-|motion| commands in |Operator-pending| and |Visual| modes.  However, you
-cannot make these motions |linewise| or |characterwise|, since the |:omap|s
-that define them start with "v" in order to make the default behavior
-inclusive.  (See |o_v|.)  In other words, "dV%" will not work.  The
-work-around is to go through Visual mode:  "V%d" will work.
-
-LANGUAGES:					*matchit-languages*
-
-Currently, the following languages are supported:  Ada, ASP with VBS, Csh,
-DTD, Entity, Essbase, Fortran, HTML, JSP (same as HTML), LaTeX, Lua, Pascal,
-SGML, Shell, Tcsh, Vim, XML.  Other languages may already have support via
-the default |filetype-plugin|s in the standard vim distribution.
-
-To support a new language, see |matchit-newlang| below.
-
-DETAILS:				*matchit-details* *matchit-parse*
-
-Here is an outline of what matchit.vim does each time you hit the "%" key.  If
-there are |backref|s in |b:match_words| then the first step is to produce a
-version in which these back references have been eliminated; if there are no
-|backref|s then this step is skipped.  This step is called parsing.  For
-example, "\(foo\|bar\):end\1" is parsed to yield
-"\(foo\|bar\):end\(foo\|bar\)".  This can get tricky, especially if there are
-nested groups.  If debugging is turned on, the parsed version is saved as
-|b:match_pat|.
-
-							*matchit-choose*
-Next, the script looks for a word on the current line that matches the pattern
-just constructed.  It includes the patterns from the 'matchpairs' option.
-The goal is to do what you expect, which turns out to be a little complicated.
-The script follows these rules:
-
-	Insist on a match that ends on or after the cursor.
-	Prefer a match that includes the cursor position (that is, one that
-		starts on or before the cursor).
-	Prefer a match that starts as close to the cursor as possible.
-	If more than one pattern in |b:match_words| matches, choose the one
-		that is listed first.
-
-Examples:
-
-	Suppose you >
-		:let b:match_words = '<:>,<tag>:</tag>'
-<	and hit "%" with the cursor on or before the "<" in "a <tag> is born".
-	The pattern '<' comes first, so it is preferred over '<tag>', which
-	also matches.  If the cursor is on the "t", however, then '<tag>' is
-	preferred, because this matches a bit of text containing the cursor.
-	If the two groups of patterns were reversed then '<' would never be
-	preferred.
-
-	Suppose you >
-		:let b:match_words = 'if:end if'
-<	(Note the space!) and hit "%" with the cursor at the end of "end if".
-	Then "if" matches, which is probably not what you want, but if the
-	cursor starts on the "end " then "end if" is chosen.  (You can avoid
-	this problem by using a more complicated pattern.)
-
-If there is no match, the cursor does not move.  (Before version 1.13 of the
-script, it would fall back on the usual behavior of |%|).  If debugging is
-turned on, the matched bit of text is saved as |b:match_match| and the cursor
-column of the start of the match is saved as |b:match_col|.
-
-Next, the script looks through |b:match_words| (original and parsed versions)
-for the group and pattern that match.  If debugging is turned on, the group is
-saved as |b:match_ini| (the first pattern) and |b:match_tail| (the rest).  If
-there are |backref|s then, in addition, the matching pattern is saved as
-|b:match_word| and a table of translations is saved as |b:match_table|.  If
-there are |backref|s, these are determined from the matching pattern and
-|b:match_match| and substituted into each pattern in the matching group.
-
-The script decides whether to search forwards or backwards and chooses
-arguments for the |searchpair()| function.  Then, the cursor is moved to the
-start of the match, and |searchpair()| is called.  By default, matching
-structures inside strings and comments are ignored.  This can be changed by
-setting |b:match_skip|.
-
-==============================================================================
-2. Activation						*matchit-activate*
-
-You can use this script as a plugin, by copying it to your plugin directory.
-See |add-global-plugin| for instructions.  You can also add a line to your
-|vimrc| file, such as >
-	:source $VIMRUNTIME/macros/matchit.vim
-or >
-	:runtime macros/matchit.vim
-Either way, the script should start working the next time you start up Vim.
-
-(Earlier versions of the script did nothing unless a |buffer-variable| named
-|b:match_words| was defined.  Even earlier versions contained autocommands
-that set this variable for various file types.  Now, |b:match_words| is
-defined in many of the default |filetype-plugin|s instead.)
-
-For a new language, you can add autocommands to the script or to your vimrc
-file, but the recommended method is to add a line such as >
-	let b:match_words = '\<foo\>:\<bar\>'
-to the |filetype-plugin| for your language.  See |b:match_words| below for how
-this variable is interpreted.
-
-TROUBLESHOOTING					*matchit-troubleshoot*
-
-The script should work in most installations of Vim.  It may not work if Vim
-was compiled with a minimal feature set, for example if the |+syntax| option
-was not enabled.  If your Vim has support for syntax compiled in, but you do
-not have |syntax| highlighting turned on, matchit.vim should work, but it may
-fail to skip matching groups in comments and strings.  If the |filetype|
-mechanism is turned off, the |b:match_words| variable will probably not be
-defined automatically.
-
-==============================================================================
-3. Configuration					*matchit-configure*
-
-There are several variables that govern the behavior of matchit.vim.  Note
-that these are variables local to the buffer, not options, so use |:let| to
-define them, not |:set|.  Some of these variables have values that matter; for
-others, it only matters whether the variable has been defined.  All of these
-can be defined in the |filetype-plugin| or autocommand that defines
-|b:match_words| or "on the fly."
-
-The main variable is |b:match_words|.  It is described in the section below on
-supporting a new language.
-
-				*MatchError* *matchit-hl* *matchit-highlight*
-MatchError is the highlight group for error messages from the script.  By
-default, it is linked to WarningMsg.  If you do not want to be bothered by
-error messages, you can define this to be something invisible.  For example,
-if you use the GUI version of Vim and your command line is normally white, you
-can do >
-	:hi MatchError guifg=white guibg=white
-<
-						*b:match_ignorecase*
-If you >
-	:let b:match_ignorecase = 1
-then matchit.vim acts as if 'ignorecase' is set: for example, "end" and "END"
-are equivalent.  If you >
-	:let b:match_ignorecase = 0
-then matchit.vim treats "end" and "END" differently.  (There will be no
-b:match_infercase option unless someone requests it.)
-
-						*b:match_debug*
-Define b:match_debug if you want debugging information to be saved.  See
-|matchit-debug|, below.
-
-						*b:match_skip*
-If b:match_skip is defined, it is passed as the skip argument to
-|searchpair()|.  This controls when matching structures are skipped, or
-ignored.  By default, they are ignored inside comments and strings, as
-determined by the |syntax| mechanism.  (If syntax highlighting is turned off,
-nothing is skipped.)  You can set b:match_skip to a string, which evaluates to
-a non-zero, numerical value if the match is to be skipped or zero if the match
-should not be skipped.  In addition, the following special values are
-supported by matchit.vim:
-	s:foo becomes (current syntax item) =~ foo
-	S:foo becomes (current syntax item) !~ foo
-	r:foo becomes (line before cursor) =~ foo
-	R:foo becomes (line before cursor) !~ foo
-(The "s" is meant to suggest "syntax", and the "r" is meant to suggest
-"regular expression".)
-
-Examples:
-
-	You can get the default behavior with >
-		:let b:match_skip = 's:comment\|string'
-<
-	If you want to skip matching structures unless they are at the start
-	of the line (ignoring whitespace) then you can >
-		:let b:match_skip = 'R:^\s*'
-<	Do not do this if strings or comments can span several lines, since
-	the normal syntax checking will not be done if you set b:match_skip.
-
-	In LaTeX, since "%" is used as the comment character, you can >
-		:let b:match_skip = 'r:%'
-<	Unfortunately, this will skip anything after "\%", an escaped "%".  To
-	allow for this, and also "\\%" (an excaped backslash followed by the
-	comment character) you can >
-		:let b:match_skip = 'r:\(^\|[^\\]\)\(\\\\\)*%'
-<
-	See the $VIMRUNTIME/ftplugin/vim.vim for an example that uses both
-	syntax and a regular expression.
-
-==============================================================================
-4. Supporting a New Language				*matchit-newlang*
-							*b:match_words*
-In order for matchit.vim to support a new language, you must define a suitable
-pattern for |b:match_words|.  You may also want to set some of the
-|matchit-configure| variables, as described above.  If your language has a
-complicated syntax, or many keywords, you will need to know something about
-Vim's |regular-expression|s.
-
-The format for |b:match_words| is similar to that of the 'matchpairs' option:
-it is a comma (,)-separated list of groups; each group is a colon(:)-separated
-list of patterns (regular expressions).  Commas and backslashes that are part
-of a pattern should be escaped with backslashes ('\:' and '\,').  It is OK to
-have only one group; the effect is undefined if a group has only one pattern.
-A simple example is >
-	:let b:match_words = '\<if\>:\<endif\>,'
-		\ . '\<while\>:\<continue\>:\<break\>:\<endwhile\>'
-(In Vim regular expressions, |\<| and |\>| denote word boundaries.  Thus "if"
-matches the end of "endif" but "\<if\>" does not.)  Then banging on the "%"
-key will bounce the cursor between "if" and the matching "endif"; and from
-"while" to any matching "continue" or "break", then to the matching "endwhile"
-and back to the "while".  It is almost always easier to use |literal-string|s
-(single quotes) as above:  '\<if\>' rather than "\\<if\\>" and so on.
-
-Exception:  If the ":" character does not appear in b:match_words, then it is
-treated as an expression to be evaluated.  For example, >
-	:let b:match_words = 'GetMatchWords()'
-allows you to define a function.  This can return a different string depending
-on the current syntax, for example.
-
-Once you have defined the appropriate value of |b:match_words|, you will
-probably want to have this set automatically each time you edit the
-appropriate file type.  The recommended way to do this is by adding the
-definition to a |filetype-plugin| file.
-
-Tips: Be careful that your initial pattern does not match your final pattern.
-See the example above for the use of word-boundary expressions.  It is usually
-better to use ".\{-}" (as many as necessary) instead of ".*" (as many as
-possible).  See |\{-|.  For example, in the string "<tag>label</tag>", "<.*>"
-matches the whole string whereas "<.\{-}>" and "<[^>]*>" match "<tag>" and
-"</tag>".
-
-				*matchit-spaces* *matchit-s:notend*
-If "if" is to be paired with "end if" (Note the space!) then word boundaries
-are not enough.  Instead, define a regular expression s:notend that will match
-anything but "end" and use it as follows: >
-	:let s:notend = '\%(\<end\s\+\)\@<!'
-	:let b:match_words = s:notend . '\<if\>:\<end\s\+if\>'
-<							*matchit-s:sol*
-This is a simplified version of what is done for Ada.  The s:notend is a
-|script-variable|.  Similarly, you may want to define a start-of-line regular
-expression >
-	:let s:sol = '\%(^\|;\)\s*'
-if keywords are only recognized after the start of a line or after a
-semicolon (;), with optional white space.
-
-					*matchit-backref* *matchit-\1*
-In any group, the expressions |\1|, |\2|, ..., |\9| refer to parts of the
-INITIAL pattern enclosed in |\(|escaped parentheses|\)|.  These are referred
-to as back references, or backrefs.  For example, >
-	:let b:match_words = '\<b\(o\+\)\>:\(h\)\1\>'
-means that "bo" pairs with "ho" and "boo" pairs with "hoo" and so on.  Note
-that "\1" does not refer to the "\(h\)" in this example.  If you have
-"\(nested \(parentheses\)\) then "\d" refers to the d-th "\(" and everything
-up to and including the matching "\)":  in "\(nested\(parentheses\)\)", "\1"
-refers to everything and "\2" refers to "\(parentheses\)".  If you use a
-variable such as |s:notend| or |s:sol| in the previous paragraph then remember
-to count any "\(" patterns in this variable.  You do not have to count groups
-defined by |\%(\)|.
-
-It should be possible to resolve back references from any pattern in the
-group.  For example, >
-	:let b:match_words = '\(foo\)\(bar\):more\1:and\2:end\1\2'
-would not work because "\2" cannot be determined from "morefoo" and "\1"
-cannot be determined from "andbar".  On the other hand, >
-	:let b:match_words = '\(\(foo\)\(bar\)\):\3\2:end\1'
-should work (and have the same effect as "foobar:barfoo:endfoobar"), although
-this has not been thoroughly tested.
-
-You can use |zero-width| patterns such as |\@<=| and |\zs|.  (The latter has
-not been thouroughly tested in matchit.vim.)  For example, if the keyword "if"
-must occur at the start of the line, with optional white space, you might use
-the pattern "\(^\s*\)\@<=if" so that the cursor will end on the "i" instead of
-at the start of the line.  For another example, if HTML had only one tag then
-one could >
-	:let b:match_words = '<:>,<\@<=tag>:<\@<=/tag>'
-so that "%" can bounce between matching "<" and ">" pairs or (starting on
-"tag" or "/tag") between matching tags.  Without the |\@<=|, the script would
-bounce from "tag" to the "<" in "</tag>", and another "%" would not take you
-back to where you started.
-
-DEBUGGING				*matchit-debug* *:MatchDebug*
-
-If you are having trouble figuring out the appropriate definition of
-|b:match_words| then you can take advantage of the same information I use when
-debugging the script.  This is especially true if you are not sure whether
-your patterns or my script are at fault!  To make this more convenient, I have
-made the command :MatchDebug, which defines the variable |b:match_debug| and
-creates a Matchit menu.  This menu makes it convenient to check the values of
-the variables described below.  You will probably also want to read
-|matchit-details| above.
-
-Defining the variable |b:match_debug| causes the script to set the following
-variables, each time you hit the "%" key.  Several of these are only defined
-if |b:match_words| includes |backref|s.
-
-							*b:match_pat*
-The b:match_pat variable is set to |b:match_words| with |backref|s parsed.
-							*b:match_match*
-The b:match_match variable is set to the bit of text that is recognized as a
-match.
-							*b:match_col*
-The b:match_col variable is set to the cursor column of the start of the
-matching text.
-							*b:match_wholeBR*
-The b:match_wholeBR variable is set to the comma-separated group of patterns
-that matches, with |backref|s unparsed.
-							*b:match_iniBR*
-The b:match_iniBR variable is set to the first pattern in |b:match_wholeBR|.
-							*b:match_ini*
-The b:match_ini variable is set to the first pattern in |b:match_wholeBR|,
-with |backref|s resolved from |b:match_match|.
-							*b:match_tail*
-The b:match_tail variable is set to the remaining patterns in
-|b:match_wholeBR|, with |backref|s resolved from |b:match_match|.
-							*b:match_word*
-The b:match_word variable is set to the pattern from |b:match_wholeBR| that
-matches |b:match_match|.
-							*b:match_table*
-The back reference '\'.d refers to the same thing as '\'.b:match_table[d] in
-|b:match_word|.
-
-==============================================================================
-5. Known Bugs and Limitations				*matchit-bugs*
-
-Just because I know about a bug does not mean that it is on my todo list.  I
-try to respond to reports of bugs that cause real problems.  If it does not
-cause serious problems, or if there is a work-around, a bug may sit there for
-a while.  Moral:  if a bug (known or not) bothers you, let me know.
-
-The various |:vmap|s defined in the script (%, |g%|, |[%|, |]%|, |a%|) may
-have undesired effects in Select mode |Select-mode-mapping|.  At least, if you
-want to replace the selection with any character in "ag%[]" there will be a
-pause of |'updatetime'| first.
-
-It would be nice if "\0" were recognized as the entire pattern.  That is, it
-would be nice if "foo:\end\0" had the same effect as "\(foo\):\end\1".  I may
-try to implement this in a future version.  (This is not so easy to arrange as
-you might think!)
-
-==============================================================================
-vim:tw=78:fo=tcq2:
diff --git a/base/.vim/doc/tags b/base/.vim/doc/tags
deleted file mode 100644
index 4ccdc87..0000000
--- a/base/.vim/doc/tags
+++ /dev/null
@@ -1,50 +0,0 @@
-:MatchDebug	matchit.txt	/*:MatchDebug*
-MatchError	matchit.txt	/*MatchError*
-[%	matchit.txt	/*[%*
-]%	matchit.txt	/*]%*
-b:match_col	matchit.txt	/*b:match_col*
-b:match_debug	matchit.txt	/*b:match_debug*
-b:match_ignorecase	matchit.txt	/*b:match_ignorecase*
-b:match_ini	matchit.txt	/*b:match_ini*
-b:match_iniBR	matchit.txt	/*b:match_iniBR*
-b:match_match	matchit.txt	/*b:match_match*
-b:match_pat	matchit.txt	/*b:match_pat*
-b:match_skip	matchit.txt	/*b:match_skip*
-b:match_table	matchit.txt	/*b:match_table*
-b:match_tail	matchit.txt	/*b:match_tail*
-b:match_wholeBR	matchit.txt	/*b:match_wholeBR*
-b:match_word	matchit.txt	/*b:match_word*
-b:match_words	matchit.txt	/*b:match_words*
-g%	matchit.txt	/*g%*
-matchit	matchit.txt	/*matchit*
-matchit-%	matchit.txt	/*matchit-%*
-matchit-\1	matchit.txt	/*matchit-\\1*
-matchit-activate	matchit.txt	/*matchit-activate*
-matchit-backref	matchit.txt	/*matchit-backref*
-matchit-bugs	matchit.txt	/*matchit-bugs*
-matchit-choose	matchit.txt	/*matchit-choose*
-matchit-configure	matchit.txt	/*matchit-configure*
-matchit-debug	matchit.txt	/*matchit-debug*
-matchit-details	matchit.txt	/*matchit-details*
-matchit-highlight	matchit.txt	/*matchit-highlight*
-matchit-hl	matchit.txt	/*matchit-hl*
-matchit-intro	matchit.txt	/*matchit-intro*
-matchit-languages	matchit.txt	/*matchit-languages*
-matchit-modes	matchit.txt	/*matchit-modes*
-matchit-newlang	matchit.txt	/*matchit-newlang*
-matchit-o_%	matchit.txt	/*matchit-o_%*
-matchit-parse	matchit.txt	/*matchit-parse*
-matchit-s:notend	matchit.txt	/*matchit-s:notend*
-matchit-s:sol	matchit.txt	/*matchit-s:sol*
-matchit-spaces	matchit.txt	/*matchit-spaces*
-matchit-troubleshoot	matchit.txt	/*matchit-troubleshoot*
-matchit-v_%	matchit.txt	/*matchit-v_%*
-matchit.txt	matchit.txt	/*matchit.txt*
-matchit.vim	matchit.txt	/*matchit.vim*
-o_[%	matchit.txt	/*o_[%*
-o_]%	matchit.txt	/*o_]%*
-o_g%	matchit.txt	/*o_g%*
-v_[%	matchit.txt	/*v_[%*
-v_]%	matchit.txt	/*v_]%*
-v_a%	matchit.txt	/*v_a%*
-v_g%	matchit.txt	/*v_g%*